You are browsing the archive for 2009 July.

WHEEL JAM TRUCK SHOW

12:58 pm in Home, Other Events, Shows / Events, Uncategorized by bruce-smith

stuart-collin


WHEEL JAM 2009

Record Turnout for Huron Truck Show

The 6th annual Wheel Jam Truck Show June 5-7 in Huron, SD, was a successful event for truckers and truck enthusiasts, despite the rain. A record 104 trucks were registered from South Dakota, Minnesota, Wisconsin, Iowa, Kentucky, Illinois Oklahoma, and Canada.


Special guests included G-man from Chrome Shop Mafia with the Pit Boss and expo trailer, Meradith Ochs from Free Wheelin, Carl Carstens from Rockwood Products and Roger Snyder from Large Car Magazine.


Twenty-seven drivers participated in our annual Jake Brake competition, but Jerod Blue finished first.


Other award winners include: JR Schlenger of Britt, IA won 1st place in the 2001-2006 Bobtail; Colin Stuart of Harvard, IL won 1st place Best Interior and 1st place 1984-older Bobtail; Habeck Trucking of Belle Fourche, SD won 1st place in Fleet; and Steve Hendershot of LaPorte City, IA won 1st place in Cab Over. The Lifetime Achievement Award went to Norman Mason of Huron, SD. Norman has logged more than 70 years of service in the trucking industry.


For more information, contact:

Scot Marone

18 Wheel Truck Promotions

431 18th St. SW

Huron, SD 57350

605-354-2809

www.wheeljamtruckshow.com



Compact Craftsman Mig Welder

9:01 am in Featured Product, Products by bruce-smith

30084_digtl-mig-welderDIGITAL MIG WELDER

Craftsman welding equipment goes digital

Owners of custom rigs are always customizing, which oft times includes a bit of custom welding. The new Craftsman® Digital Dual Operation MIG Welder with digital interface automatically adjusts internal settings for materials and shielding gas.


It welds up to 5/16 in. mild steel to cast iron, aluminum and stainless steel. The state-of-the-art MIG welder features a turbo cooling fan, eight voltage settings for accurate heat control and thermal overload protection. It incorporates solid state electronic heat control for consistent welds. An electronic spot timer helps ensure precise welding.


The welder is equipped with a full 8-ft. torch assembly. The 220-amp MIG welder has a 20 percent duty cycle at 160 amps. It has a 50 amp input plug and a welding range of 30-180 amps. Retail price: $1699.  www.craftsman.com 47534_frstyl-wldg-helmet


A great companion item is the new Freestyle Welding Helmet has the largest viewing area of any helmet in the Craftsman lineup.


The helmet incorporates versatile 3-in-1 technology for welding, grinding and cutting modes. Depending on the work environment, there are variable shade, sensitivity and delay adjustments to meet a range of welding requirements. Retail: $299

Upholstery Cleaning Tips

8:04 am in Articles, How-To's, Technical by bruce-smith

alne-e129-power-cleanerBy John Baxter

Let’s face facts: An older tractor that’s clean and sharp on the interior always seems a lot newer and more inviting than one that’s dirty and ragged. That look and feel is magnified in a customized rig where one’s eyes tend to focus on the seats before anything else in the cab.

While full-on Limited Mileage show trucks may have the luxury of low annual miles and owners who think nothing of re-working the interior before every major show, owner-operators of working class show trucks usually make the best of whatever seating is there because they have to be frugal.

Show truck or work truck, upholstery has to be maintained to look sharp and perform well over time. And there’s a right way and a wrong way to handle such upholstery upkeep.

“Keeping upholstery clean is best done using mild cleaners and cleaning it often,” advises Elwin Eash, senior vice president of sales at Indiana Custom Trucks in LaGrange, Indiana.

If the cleaning gets tough, be careful, Eash says, and “certainly, stay away from bleaches and harsh cleaners as they can actually remove dye colors.”

CHOOSING THE RIGHT CLEANERS

The type of cleaner used makes a difference, concurs Bryan Martin, owner of 4 State Trucks of Joplin, Missouri. “Develop common sense about upholstery cleaning. Don’t use anything with petroleum or harsh chemical as its base.”

While general cleaners such as Windex or Formula 409 will work “outside the truck,” he says, for interior detailing use a product designed for that task. “You can certainly use this on vinyl and plastic found in the sleeper and on the dashboard,” says Martin holding up a near-empty bottle of green-hued liquid. “But I’d be careful using it around leather.

Martin says real leather “is not as forgiving as simulated leather and vinyls as far as cleaners go. A general-purpose interior cleaner might be OK. But you might want to try such a product on a very small area, preferably a corner, behind the passenger seat first to see how it works if you have reservations.”

Lane Pietro, President & CEO of Fast Lane Mobile Wash & Detail in Ellisville, Missouri, and manufacturer of Lane’s Professional Car Products, agrees:

“Owners of custom rigs should invest in cleaning and conditioning products designed specifically for whatever type of material is used for the upholstery,” advises Lane, himself a long-time professional detailer of customized vehicles.

“A leather-specific cleaner, like our E140 for example, used in conjunction with a leather upholstery conditioner, is the only sure way to keep the seats looking new. A leather conditioner replaces the natural moisture back into the material after cleaning so it doesn’t crack or deteriorate over time.”

“Your leather seats should be cleaned and conditioned every two to three months to preserve the leather’s strength, durability and appearance,” Pietro says. “And I’d recommend avoiding detailing seats with Armor All and other products that have alcohol or silicone in them because those ingredients tend to dry out leathers and vinyls.”

TOUGH CLEANING SOLUTIONS

The toughest-to-clean stains come from nicotine, Martin says. “It discolors the upholstery and puts a film on it. This is the one time you might want to use a very strong cleaner, normally a powerful solvent, on synthetic materials only,” he says.

Pietro says the most common mistake made by non-professional detailers in these instances is “over-saturating” the area with the cleaner to the point it soaks into the foam underneath, which can compound the existing problem, and scrubbing hard, “spreading the stain instead of removing it.”wolfgang-leather-kit

The key with stains is to apply a light amount of cleaner, let it work for a few seconds, then pad the area with a micro-fiber towel, or use a brush to lightly scrub in a small, circular motion, dabbing away the dirty cleaner as you work.

“You could use a special upholstery cleaner on seats or the dash, or an aggressive shampoo on rugs,” says Martin. “If the stains don’t come up the first time, reapply using the same concentration and repeat the process.”

The best advice of all is if ever in doubt as to how to go about cleaning your rig’s upholstery and carpet before a show, take the safe route and make an appointment with a professional auto detailer.